- 02488 212 001
- principalssp@rediffmail.com
Shree Samarth Academy's
SHREE SAMARTH POLYTECHNIC
Mhasane Phata, Ahmednagar-Pune Road, Tal. Parner, Dist. Ahmednagar 414 302
( Recognized By All India Council For Technical Education (AICTE) New Delhi.
Directorate of Technical Education (DTE) Mumbai And Affiliated To MSBTE. Mumbai Maharashtra State )
DTE Code. No. 5356 MSBTE Code. No. 1466
About Mechanical Department
Department of mechanical Engineering established in is dedicated to produce students who excel in this field. Department has highly qualified and young faculty along with experienced faculty. mechanical laboratories are equipped with latest instruments and other equipments. The department of mechanical Engineering strives to provide innovative and quality education with high standard so as to achieve academic excellence and create conducive platform for the students to achieve their career goals.
VISION
Shaping quality engineer through value based education
MISSION
To provide value based technical education and mold the character of younger generation
FACULTY
| Sr.No | No Of Faculty |
|---|---|
| 1 | 14 |
Teacher student Ratio 1 : 25
INFRASTRUCTURE
| Sr.No | DESCRIPTION | TOTAL NO. |
|---|---|---|
| 1 | Class Room | 06 |
| 2 | Tutorial Room | 01 |
| 3 | Lab | 06 |
| 4 | Seminar Hall | 01 |
LAB
| Sr.No | LAB NAME | DESCRIPTION | TOTAL NO. |
|---|---|---|---|
| 1 | THEORY OF MACHINES LAB | Ball type valve, Bevel Gear Model, Centrifugal Clutch, Chain Drive,Cone Clutch, Diaphragam Valve, Flat belt Drive, Rack And Pinion Drive,Power Transmission With Drilling Machine, Chain Drive And Sprocket. | 10 |
| 2 | POWER ENGINEERING LAB/THERMAL LAB | Ice plant working model, Model And Refrigeration Working Model, Air Compressor Model, Air conditioner working model, multi cylinder petrol engine, petrol engine(2 stroke)motor cycle/scootercut section model of single cyl. Diesel engine, Cupboard, Office Table, Office Chair, Practical Table, Stool, Bobcock wilcox boiler, Cut section of single cylinder air comoressor, Cut section of reciprocating hydralic pump, Emissivity Apparatus, Forced convectional model, Heat exchanger set up, Lancashire boiler, Cut section model of rotary air compressor, Pressure relief valve | 21 |
| 3 | METROLOGY AND QUALITY CONTROL LAB | Office Chair, Cupboard, Office Table, Surface Plate(600*400*80), M.V.Block, Magnetic Base, Spirit Level 12", G.T Vernier caliper (1-26 cm), S.T.Micrometer (0-25cm), Vernier Caliper 6", Vernier Caliper 12",O S Micrometer 25-50mm, O S Micrometer 0-25mm, Radius Gauge (1-7mm), Radius Gauge (7.5-15mm), Digital vernier caliper, Dial Indicator LC-0.01mm ,Sin bar:Indian make:200, Sin bar:Indian make:300, Vernier caliper 150mm with L.C=0.02, Vernier caliper 300mm with L.C=0.02, Sin bar:Indian make:100, Radious Gauge, Vernier Height gauge, Vernier bevel protractor, Dial Indicator LC-0.001mm, Set of angle Gauge5-90 degree, Set of angle Gauge1-45 degree, Micrometer,0-25mm,LC-0.01mm, Micrometer,25-50mm,LC-0.02mm, Practical Table, Stool | 10 |
| 4 | CAD/CAM LAB | lenovo pc(HOD& TNP), HP Laser jet 1008 Printer, Furniture, dell screen/keyboard/mouse/win7 | 04 |
| 5 | AUTOMOBILE ENGINEERING LAB | Cut Section Of Scooter Engine, Cut Section model Of Gear Box, Cut Section model, Office Table, Office Chair, Cut Section Of synchromesh Gear Box, Cut Section Of Differential Gear Box, Cut Section Of Rack & Pinion Steering Gear Box, Cut Section Of Rigid Axle Suspension, Cupboard, Model Jeep, Working of single plate coil, Workig model of diaphragm spring type clutch, Working model of suspension, Working model of hydraulic braking system | 15 |
| 6 | FLUID MECHANICS And MACHINERY LAB | Bourdon pressure gauge, bernoullies theorem apparatus, venturimeter, centrifugal pump test rig, reciprocating pump test rig, losses for flow through pipe | 06 |
| 7 | WORKSHOP | Half round (marfa)file12",Adjustable three piece die and stack set with,1/2",3/4",1" die spanner,Ball pin hammer(800gm),Ball pin hammer(500gm),Ball pin hammer(200gm),Steel rule 6",Carpenter saw 750mm,Carpenter saw 400mm,Hack saw frame,Bench grinder 150mm,chisel hammer,Oxygen gas cyl.,Regulator with dial indicator,DA Cylinder,Hose pipe 14mm,Hose clip,Goggle,Cylindrical key,Cutting Torch,Welding torch,Transformer cable,Hand gloves Pair,Earthing clamp,Lugs,Safety Screen,Welding rod,Brass welding rod,CCMS welding Rod,flux powder,Welding helmate,Holder Welding,G clamp 8",G clamp 4",Oil can 250ml,Grease Gun,-,G,-508,Magnatic Spirit Level,Out side micrometer,Vernier Caliper,Height vernier caliper,Number Punch Set (3/16',-5mm),Slip Gauge Set in Box 83Pcs,Inside caliper,outside caliper,spring caliper,92,Metallic Measurement Tape,screw driver set,centre Punch,Hand vice,Dial Indicator,Wooden handle,Plastoc Handle,Adjustable Spanner,Steel Rule 12",Drill bit 1/4" set,Try square 300mm,Try square 200mm,Try square 100mm,Try square 150mm,Marking Block,hack saw blade,Pipe vice,Angle grinder (Hand),Allenkey Set,Open Ended Spanner,Ring Spanner,Screw driver,Jack Plammer,Steel Rule 1 meter,Surface Plate,Anvil,Fitter Vice-6",Carpenter Vice-6",Welding Transformer 400amp,Circular saw,Shaepening stone,Sharpening Stone,Pincer 6",Pincer 8",Chisel 1/2",Chisel 1",All Geared Lathe machine 4.5 Ft,Bench Grinder 8" W/O grinding Wheel,Wood traning lathe 4Ft,Surface planner with circular saw,Piller Drill Machine,Hack Saw Machine Set Hydraulic,Shearing Machine Foot Oprated 18",True Chuck 8",Jig Saw Machine,Milling Machine,Quick Change tool,Taper turing attachment | 92 |
Student Achievement
Kabbadi Runnerup
Placement Status
12 Students placed at TATA MOTORS, MAHINDRA AND MAHINDRA , SIGMA ELECTRICAL CORP. Pune.
Download Syllabus
Result Analysis
2020-21
| No of Students | % of Passing | 1st Class | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Sr.No | Class | Appeared | Passed | Passed with ATKT | Failed | Without ATKT | With ATKT | No. | Distinction |
| 1 | ME5I | 130 | 100 | 130 | 0 | 100 | 130 | 0 | 100 |
| 2 | ME3I | 90 | 90 | 90 | 0 | 0 | 0 | 0 | 65 |
2019-20
| No of Students | % of Passing | 1st Class | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Sr.No | Class | Appeared | Passed | Passed with ATKT | Failed | Without ATKT | With ATKT | No. | Distinction |
| 1 | ME6I | 45 | 45 | 45 | 0 | 0 | 0 | 0 | 45 |
| 2 | ME4I | 100 | 100 | 0 | 0 | 0 | 0 | 0 | 100 |